Cable/ Installation Test and Measurement Kits archives

WINMS

Subject of Activity: Cable/Installation Test and Measurement Kits (In Defense, Aviation, etc. industries, test and measurement kits of Electrical Cables, RF Cables and Fiber Optic Cables, as well as Cable Measurement Sensor for the detection of cable thefts and cable breaks in railways)

GENERAL INFORMATION

With the Cable Test and Measurement System, which is used in every place where the cable is located, especially in aviation, it also allows you to analyze the signal passing over the cable, with the possibility of detecting the number of faults such as short circuit / open circuit from only one end (without the need to remove the other end). It has been developed in cooperation with the R&D departments of more than 20 companies operating in various sectors such as Energy, Automotive and Railway, especially in the Defense and Aviation sectors.

In the defense sector, it is used both by organizations that manufacture and repair military platforms such as submarines, warships, helicopters, tanks, aircraft and UAVs (French Naval Group, Safrane Electronics, etc.) and by the maintenance and repair levels of the armed forces themselves.

In addition to Airbus, Boeing, Dassault Aviation, Gulfstream and other major airline companies (Lufthansa, Delta, United Airlines, Swiss Air, Emirates, etc.) in the aviation industry, it is used by both manufacturers and operation / maintenance repair stages of various helicopter and UAV platforms.

It is also used in the energy, automobile and railway sectors. For example, in the railway sector, there is a model that warns users by giving an alarm in case of cable cuts (including cable theft) by performing continuous real-time control of the line up to 14 km.

WiN MS : Cable/Connector Mobile Test and Measurement Solutions

Multi Carrier Time Domain Reflectometer (MCTDR) technology is used, which combines the accuracy of the Frequency Domain Reflectometer (FDR) and the speed of the Time Domain Reflectometer (TDR), thus ensuring the highest level of monitoring and troubleshooting performance of the cable system.

With the Cable/Installation/Harrness Test and Measurement System, it also allows you to analyze the signal passing over the cable along the cable line, with the possibility of detecting at what meter of faults such as short circuit / open circuit from only one end (without the need to remove the other end). It also makes it possible to detect defective connectors in the system.

Cable/Connector Mobile Test and Measurement kits using MCTDR technology provide users with advantages unmatched in the market:

It works on any type of cable.
It can be used in live cables.
Detects continuous or intermittent faults.
Only one end of the cable is used.
Thanks to Bluetooth, you don't have to stand by the cable/connectors test.

Win MS: Cable/Installation Mobile Test and Measurement Kit Available Cable/Installation Detection/Test Method:

Installation control of a currently faulty system/device is performed first,
For this, the cable going to the device is separated by the maintenance personnel and both ends are left free and a very laborious and time-consuming test such as a short-circuit check is carried out,
As a result of this test, even if there is no break in the cable, it cannot be checked whether the signal passing through it actually transmits in the expected decibel and characteristic.
In Win MS, only one end of the connector connected to the Cable/Installation is disconnected and the appropriate intermediate cables are connected to the bluetooth adapter,
The adapter in question enables the application of the desired test scenario with the commands from the tablet used by the maintenance personnel,
All cable types used in defense, aviation and industry and the tests to be applied for each cable type are also defined in the tablet,
All that needs to be done is to enter the cable type used in the system on the tablet (one time), by the user, and for subsequent tests, direct testing can be performed without the need for this process,
It is automatically ensured that the type of cable used in the system/device to be tested is selected by the maintenance personnel on the tablet, and then the test is started and the test is carried out along the cable line,
All test/measurement results can be memorized on the tablet and transferred to the maintenance computer/system, so that both the platform's fault history and the system/device's fault history information can be recorded,
In addition to these, it is possible to detect scratches and defective connectors on the cable that cannot be detected with a multimeter.

In All Models;

99% of the cables used in the aerospace and defense industry are compatible,
Preloaded and adaptable cable library (database)
Digital technology that offers extremely fast, accurate and reliable measurements,
Does not damage the tested cables,
Unique user-friendly interface,
Ability to create reports by saving graphics, screenshots, photos,
Provides high mobility thanks to tablet and electrical module,
You do not need to stand by the cable while testing the cable.

WiN MS : Cable/Connector Mobile Test and Measurement Solutions 3 Different Models